Designed for high flow rate of media or aqueous solutions
3 to 5 times faster than standard syringe filters
Typical starting flow rate at 25°C for water at 2bar (~29psi) is 175mL/min
0.22µm or µm PES membrane
Low protein binding
Larger filter surface
Low dead Vol Additional specifications
Higher operating pressure
Burst pressure 10bar (~145psi)
Bubble point 3.7bar (~53psi)
Standard luer-lock connection
Housing diameter size 33 mm, Syringe filter rests perfectly on a 50mL centrifuge tube
Gamma-sterilized, DNAse/RNAse-Free, and pyrogen-Free
Individually wrapped in peel-off plastic wrapper in convenient card box dispenser
Typical applications:
Sterile filtration of protein solutions, tissue culture media, additives, buffers, and water.
Solutions can be filtered fast due to:
Large filter surface area, that is increasing the flow rate and throuput
High operating pressure: a maximum housing pressure of 10 bar (~145 psi).
Bi-directional The syringe filter unit's bi-directional support of the filter membrane enables users to filter aqueous solutions in either direction (only ONE direction per use):
Forward (from the syringe into the container)
Backward (from the container into the syringe)
The filter unit removes micro organisms, particles, precipitates, and undissolved powders larger than 0.22 micron or 0.45 micron, depending on filter used.